[Gen-art] RE: Gen-ART review of draft-schoenw-snmp-ether-01.txt

Can you indicate exactly for the RFC Editor where you suggest this text
to be inserted? 

Dan

> -----Original Message-----
> From: Juergen Schoenwaelder [mailto:j.schoenwaelder@iu-bremen.de] 
> Sent: Tuesday, September 26, 2006 2:20 PM
> To: Romascanu, Dan (Dan)
> Cc: Black_David@emc.com; gen-art@ietf.org; 
> tony@jeffree.co.uk; Cullen Jennings
> Subject: Re: Gen-ART review of draft-schoenw-snmp-ether-01.txt
> 
> On Tue, Sep 26, 2006 at 02:13:48PM +0300, Romascanu, Dan (Dan) wrote:
> > David and Cullen,
> > 
> > Version 02 is now out. Can you please check that the issue is being 
> > addressed to your satisfaction in the new revision?
> 
> I received the comment concerning the "MUST" language after 
> submitting the -02 version and hence this change is not yet 
> included. Here is once again the new text (in case you want 
> to put it into the RFC Editor note):
> 
>    When serialized SNMP messages are sent in IEEE 802.3 frames (and in
>    other IEEE 802 MAC frame types that can natively represent Ethernet
>    type values), the Ethernet type field value of 33100 (hexadecimal
>    814C) MUST be used as the link layer protocol identifier.  In IEEE
>    802 LANs that use LLC as the means of link layer protocol
>    identification, such as IEEE 802.11 Wireless LANs, the SNAP
>    encapsulation method described in subclause 10.5 "Encapsulation of
>    Ethernet frames over LLC" in [IEEE802] MUST be used.
> 
> /js
> 
> -- 
> Juergen Schoenwaelder		    International University Bremen
> <http://www.eecs.iu-bremen.de/>	    P.O. Box 750 561, 
> 28725 Bremen, Germany
> 

_______________________________________________
Gen-art mailing list
Gen-art@ietf.org
https://www1.ietf.org/mailman/listinfo/gen-art