Re: Martini Ethernet mode

Eric Rosen <erosen@cisco.com> Wed, 31 July 2002 14:58 UTC

From: Eric Rosen <erosen@cisco.com>
Subject: Re: Martini Ethernet mode
Date: Wed, 31 Jul 2002 10:58:34 -0400
Lines: 12
Sender: pwe3-admin@ietf.org
References: <4B6D09F3B826D411A67300D0B706EFDEB0379F@nt-exch-yow.pmc-sierra.bc.ca>
Reply-To: erosen@cisco.com
Mime-Version: 1.0 (generated by SEMI 1.14.3 - "Ushinoya")
Content-Type: text/plain; charset="US-ASCII"
Cc: "'pwe3@ietf.org'" <pwe3@ietf.org>
To: Shahram Davari <Shahram_Davari@pmc-sierra.com>
In-Reply-To: Your message of Tue, 30 Jul 2002 14:27:48 -0700. <4B6D09F3B826D411A67300D0B706EFDEB0379F@nt-exch-yow.pmc-sierra.bc.ca>
User-Agent: EMH/1.14.1 SEMI/1.14.3 (Ushinoya) FLIM/1.14.3 (Unebigoryōmae) APEL/10.3 Emacs/21.2 (sparc-sun-solaris2.6) MULE/5.0 (SAKAKI)
Errors-To: pwe3-admin@ietf.org
Precedence: bulk
Status: O
Message-ID: <20140418091610.2560.50357.ARCHIVE@ietfa.amsl.com>

Shahram> What  is  the PW  selection  criteria  in  case of  Martini  native
Shahram> Ethernet mode? 

This is a  bit like asking what the "TCP  connection selection criteria" are
when you have packets to send.  It's  up to the users of the TCP connections
to know which ones to use when.

It  is the  "forwarders" (see  draft-ietf-pwe3-protocol-layer-00  and draft-
andersson-ppvpn-l2-framework-01) that  decide which  frames to put  on which
pseudowires.   Different  forwarders may  use  different  criteria. This  is
discussed in the PPVPN L2VPN framework.

RE: Martini Ethernet mode Shahram Davari
Martini Ethernet mode Shahram Davari
RE: Martini Ethernet mode Samir Sanghani
Re: Martini Ethernet mode Eric Rosen
RE: Martini Ethernet mode Shahram Davari
Re: Martini Ethernet mode Eric Rosen
RE: Martini Ethernet mode Giles Heron
RE: Martini Ethernet mode Shahram Davari
RE: Martini Ethernet mode neil.2.harrison
RE: Martini Ethernet mode Giles Heron
Re: Martini Ethernet mode Eric Rosen
Re: Martini Ethernet mode W. Mark Townsley