Re: [CCAMP] ACTN PoI Pluggable Use Cases call on 02/04/2024

["Daniele Ceccarelli (dceccare)" <[e-mail]>]

Hi Oscar,

Thanks for sharing on the list.

I think the plug and discover mode makes sense...mostly considering the fact that it's not unlikely to have the router from a vendor and the pluggable form a different one.

Cheers
Daniele

From: CCAMP <[e-mail]> On Behalf Of Oscar González de Dios
Sent: Tuesday, April 2, 2024 6:09 PM
To: 'CCAMP' <[e-mail]>
Subject: [CCAMP] ACTN PoI Pluggable Use Cases call on 02/04/2024

Dear CCAMP colleagues,

              Today, as announced in the CCAMP meeting and mailing list, we started the series of conference calls on ACTN PoI Pluggables Use cases, starting from the document presented in ccamp meeting in draft-poidt-ccamp-actn-poi-pluggable-usecases-gaps .

              We reviewed the document and, in the call, we focused on the use case of  Coherent DWDM pluggable insertion in the router linecard port. The discussion is tracked in github in https://github.com/oscargdd/draft-poidt-ccamp-actn-poi-pluggable-usecases-gaps/issues/9. Please note that, as the document is still an individual draft we are using personal github repository (will be in ccamp when the document is adopted).

              I would like to summarize the discussion here, so we can also use the mailing list for discussion.

Once a pluggable module is inserted in the proper linecard port, should it start in "shutdown" mode? If the pluggable has pre-configurations (either from factory, or externally by any means), such pre-configurations should be learnt also in the discovery phase.

There was some discussions around "plug and play". The general consensus was that, for the pluggable case, what is really desired is "plug and discover", and then, do the proper configurations to work, but NOT just "out of the box" start to work.

Next week we will review the use case with suggestions from the participants (contributions via Pull Request in github) and continue with the next use case in the draft. Join us if you are interested in the topic!

Best Regards,

              Oscar  (and rest of Packet over Optical folks participating in the call).





________________________________

Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener información privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización puede estar prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.

The information contained in this transmission is confidential and privileged information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it.

Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário, pode conter informação privilegiada ou confidencial e é para uso exclusivo da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário indicado, fica notificado de que a leitura, utilização, divulgação e/ou cópia sem autorização pode estar proibida em virtude da legislação vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destruição