Re: [nvo3] I-D Action: draft-xia-nvo3-vxlan-qosmarking-01.txt

[Behcet Sarikaya <[e-mail]>]

On Wed, Nov 12, 2014 at 2:43 PM, Black, David <[e-mail]> wrote:

>  Another +1, and please see RFC 2983, which is relevant to the DiffServ
> aspects here.
>
>
>


RFC 2474 says that::

A differentiated services boundary may be co-located with a host, subject
to local policy.

So using diffserv is an option that needs to be set in VXLAN, so far we did
not say anything on this in the draft.

Regards,

Behcet

>   Thanks,
> --David
>
>
>
> *From:* nvo3 [mailto:[e-mail]] *On Behalf Of *Larry Kreeger
> (kreeger)
> *Sent:* Wednesday, November 12, 2014 3:27 PM
> *To:* Osama Zia; Benson Schliesser; [e-mail]
>
> *Cc:* [e-mail]; Dino Farinacci;
> [e-mail]
> *Subject:* Re: [nvo3] I-D Action: draft-xia-nvo3-vxlan-qosmarking-01.txt
>
>
>
> +1
>
>
>
> I don't ever see a case where packets are being forwarded with only the
> VXLAN header and not the outer IP header, or IP/Ethernet headers.
>
>
>
>  - Larry
>
>
>
> *From: *Osama Zia <[e-mail]>
> *Date: *Wednesday, November 12, 2014 10:20 AM
> *To: *Benson Schliesser <[e-mail]>, "[e-mail]" <
> [e-mail]>
> *Cc: *"[e-mail]" <[e-mail]>, Dino Farinacci <[e-mail]>,
> "[e-mail]" <
> [e-mail]>
> *Subject: *Re: [nvo3] I-D Action: draft-xia-nvo3-vxlan-qosmarking-01.txt
>
>
>
> I would ask this question in another way…
>
>
>
> At what point do we need to make QoS decisions based on VXLAN header? I do
> not see any.
>
>
>
> From VM to NVE it can be done in IP/Ethernet. From NVE to rest of the
> network again it can be based on IP/Ethernet header. I do not see a value
> of using VXLAN/Geneve/GUE header bits for QoS
>
>
>
> *From:* nvo3 [mailto:[e-mail] <[e-mail]>] *On
> Behalf Of *Benson Schliesser
> *Sent:* Wednesday, November 12, 2014 11:34 AM
> *To:* [e-mail]
> *Cc:* [e-mail]; Dino Farinacci;
> [e-mail]
> *Subject:* Re: [nvo3] I-D Action: draft-xia-nvo3-vxlan-qosmarking-01.txt
>
>
>
> Hi, Behcet -
>
> Perhaps I'm confused about what comment (from Dino) that you are referring
> to... But in general, I think of it this way:
>
> Assuming the encap stack looks something like: IP1 / Eth1 / VXLAN / UDP /
> IP2 / Eth2  (progressing L->R as inner->outer)
>
> Then e.g. tenant VMs can mark the IP1 and Eth1 headers with whatever
> appropriate markings they desire. The NVE can mark the IP2 and Eth2 headers
> with whatever appropriate markings.
>
> Specifically, one could imagine the NVE copying the IP1 DSCP codepoint
> into the IP2 header. Alternatively one could imagine the NVE imposing an
> underlay DSCP in IP2, e.g. to discriminate between tenants. Possibly, one
> could also imagine some kind of translation policy which maps IP1
> codepoints into IP2 codepoints. And that's not even considering mechanisms
> that leverage the Eth headers, use different encap stacks, etc.
>
> Cheers,
> -Benson
>
>
>
>      *Behcet Sarikaya* <[e-mail]>
>
> November 12, 2014 at 9:01 AM
>
> Hi Dino,
>
> Regarding your comment on copying IP header QoS bits into VXLAN header,
>
> note that IP packet is coming from the VMs.
>
> Yes for dynamic marking these bits can be copied.
> However, VMs may not be configured to mark these fields.
>
> For static marking these bits can not be used because VMs are not
> aware of the VNI. So NVE has to do the static marking.
>
> Hope this clarifies.
>
> Regards,
>
> Behcet
>
>
> _______________________________________________
> nvo3 mailing list
> [e-mail]
> https://www.ietf.org/mailman/listinfo/nvo3
>
>   *Behcet Sarikaya* <[e-mail]>
>
> November 10, 2014 at 5:47 PM
>
> On Mon, Nov 10, 2014 at 9:41 PM, Brian E Carpenter
>
> <[e-mail]> <[e-mail]> wrote:
>
>  [resend with corrected address, sorry]
>
>
>
> Hi,
>
>
>
>   The first three bits (bits 5-7) are precedence bits. They are
>
>  assigned according to [RFC0791]. Precedence values '110' and '111'
>
>  are selected for routing traffic.
>
>
>
>  The last three bits (bits 8-10) are class selector bits. Thet are
>
>  assigned as follows:
>
>
>
> 001 - BK or background traffic
>
>  ...
>
>  As can be seen the markings are the same as in IEEE 802.1p...
>
>  This is not in any way compatible with RFC 2474, which also made the
>
> relevant part of RFC 791 obsolete.
>
>
>
> If you want to be compatible with RFC 2474 you should not specify the
>
> bits at all - just say that they are exactly as defined in RFC 2474
>
> and the various PHB definitions that have been published.
>
>
>
> I think that diffserv is less relevant in the context of VXLAN.
>
>
>
>   If you
>
> want to be compatible with IEEE 802.1p that is a different matter,
>
>
>
> Yes this is more relevant for VXLAN.
>
>
>
>  but you cannot mix the two up in this way.
>
>
>
> I now understand that we confused the two very different things.
>
>
>
> Regards,
>
>
>
> Behcet
>
>      Brian
>
>
>
>
>
>
>
>
>
> _______________________________________________
>
> nvo3 mailing list
>
> [e-mail]
>
> https://www.ietf.org/mailman/listinfo/nvo3
>
>