Re: [OAUTH-WG] WGLC for Step-up Authentication

[Brian Campbell <[e-mail]>]

Thanks Jaimandeep,

There are certainly some complementary aspects of the step-up work and
adaptive risk based approaches. Both in conveying information in/with an
access token that might be input into a risk score calculation and in
signaling that a more recent and/or stronger user authentication
is required when the calculated risk exceeds the allowed risk.

On Sat, Oct 15, 2022 at 10:58 PM Jaimandeep Singh <jaimandeep.phdcs21=
[e-mail]> wrote:

> Dear Brian,
>
> I strongly support this work. I have recently written a conference paper
> on supporting similar ideas titled '*Resilient Risk based Adaptive
> Authentication and Authorization (RAD-AA) Framework*'. The paper is still
> in the pre-print stage and can be accessed here
> <https://arxiv.org/abs/2208.02592>.
>
> 1. The core idea is similar. Firstly, ability to revoke or step-up the
> authentication requirements based on the risk score. Secondly, to limit the
> scope based on the risk score.
>
> 2. One of the factors determining the risk score is the way the client
> application has authenticated with the Authorization server. If it has used
> basic auth the risk score is high as compared to mTLS.
>
> 3. Additionally the idea is to downgrade the scope of the token in case
> the risk score is high. This could be achieved at the protected resource
> server end through introspection and at authorization server end while
> issuing new access when the older ones expire. This can avoid forcing the
> complete authentication cycle at client end.
>
> Regards
> Jaimandeep Singh
>
>
> On Wed, Oct 12, 2022 at 3:25 AM Brian Campbell <bcampbell=
> [e-mail]> wrote:
>
>> I don't know offhand a better place or if your specific privacy
>> consideration is already covered. Honestly, with that comment, I was just
>> aiming to keep the scope of this document concise and relevant.
>>
>> On Tue, Oct 11, 2022 at 10:06 AM Denis <[e-mail]> wrote:
>>
>>> Hi Brian,
>>>
>>> I agree with you that "must not" is more appropriate in that context.
>>>
>>> I also agree with you that the "privacy implications of opaque tokens
>>> are inherent to OAuth in general".
>>> However, I have not reviewed all the RFCs and I wonder whether such a
>>> privacy consideration has already been mentioned.
>>>
>>> It would be nice to start to mention it, rather than to continue to omit
>>> it. Do you see a better place to mention it ?
>>>
>>> Denis
>>>
>>> Thanks Denis, I agree the word "cannot" isn't quite right there. I
>>> struggled with trying to find the right wording (more than I probably
>>> should have) attempting to add a note/reminder without getting into
>>> normative sounding language. But I also wanted to make a firm statement.
>>> Words are hard sometimes. Oftentimes! But reading it again today, "cannot"
>>> doesn't work very well. I think changing to "must not" is appropriate. The
>>> privacy implications of opaque tokens are inherent to OAuth in general and
>>> I don't believe this draft is an appropriate place to attempt to give them
>>> treatment.
>>>
>>> On Tue, Oct 11, 2022 at 2:57 AM Denis <[e-mail]> wrote:
>>>
>>>> Hi Brian,
>>>>
>>>> The text states:
>>>>
>>>> Also recall that OAuth 2.0 [RFC6749] assumes access tokens are treated
>>>> as
>>>> opaque by clients. So, during the course of any token caching
>>>> strategy, a client *cannot* inspect the content of the access token to
>>>> determine the associated authentication information or other details.
>>>> The token format might be unreadable to the client or might change at
>>>> any time to become unreadable.
>>>>
>>>> A client *can *inspect the content of the access token.
>>>>
>>>> A better wording  would be:
>>>>
>>>> ...  a client *should not *inspect the content of the access token ...
>>>>
>>>> It would be worthwhile to add a Privacy Considerations section:
>>>>
>>>> 10. Privacy Considerations
>>>>
>>>> Since access tokens are presumed to be opaque to clients, clients (and
>>>> hence users) are not supposed to inspect the content of the access tokens.
>>>> Authorizations Servers are able to disclose more information than
>>>> strictly necessary about the authenticated user without the end user being
>>>> able to know it. Such additional information may endanger the privacy
>>>> of the user.
>>>>
>>>> Denis
>>>>
>>>>
>>>> I've published an -04. It has that very minor change. There was also an
>>>> off-list discussion during WGLC that resulted in thinking it'd be
>>>> worthwhile
>>>> *to add a reminder that access tokens are opaque to clients*. So I
>>>> took that as LC feedback and -04 adds a brief note towards that end.
>>>>
>>>>
>>>> https://datatracker.ietf.org/doc/draft-ietf-oauth-step-up-authn-challenge/
>>>>
>>>>
>>>>
>>>> On Mon, Oct 10, 2022 at 1:22 PM Vittorio Bertocci <vittorio=
>>>> [e-mail]> wrote:
>>>>
>>>>> Thanks Dima for the comment. Some thoughts:
>>>>>
>>>>> > (editorial)...
>>>>> Good point. "statically" would characterize the simplest of the
>>>>> scenarios, but in fact any case where the AS is the only arbiter of the
>>>>> authn level works for the point we are trying to make. We'll drop
>>>>> "statically". Thanks!
>>>>>
>>>>> > Apart from...
>>>>> This spec focuses on empowering an RS to communicate its ACR and
>>>>> freshness requirements, regardless of the reasons leading the RS to make
>>>>> that determination: the logic by which that happens is explicitly out of
>>>>> scope, and in many real life cases it might simply be unknowable (eg
>>>>> anomaly detection engines based on ML are often back boxes). The mechanism
>>>>> described here can be used alongside other mechanisms that might require
>>>>> the client to get the user to interact with the AS, as it is the case for
>>>>> insufficient_scope, but those remain distinct cases (eg insufficient _scope
>>>>> might not require any step up but simply explicit user consent, and if it
>>>>> does require a stepup, that's entirely determined by the AS without any
>>>>> communication with client or RS required).
>>>>>
>>>>> On Fri, Oct 7, 2022 at 17:43 Dima Postnikov <[e-mail]>
>>>>> wrote:
>>>>>
>>>>>> *This message originated outside your organization.*
>>>>>>
>>>>>> ------------------------------
>>>>>>
>>>>>> Couple of quick comments from me:
>>>>>>
>>>>>> 1) (Editorial) >In simple API authorization scenarios, an
>>>>>> authorization server will statically determine what authentication technique
>>>>>>
>>>>>> In many scenarios, authorization servers will use *dynamic*
>>>>>> decisioning to determine authentication techniques; it's just not
>>>>>> exposed to the client in a way to make it actionable (which is why this
>>>>>> specification's intent makes perfect sense).
>>>>>>
>>>>>> 2) Apart from authentication level, there might be other reasons why
>>>>>> users might be forced to go through the authorization flow, for example,
>>>>>> insufficient authorization / scopes / claims / etc.
>>>>>>
>>>>>> If there is a mechanism to let the client know, as a practitioner,
>>>>>> i'd rather have the same approach for both authentication and
>>>>>> authorization. There are a range of authorization policy engines in the
>>>>>> market that could return "STEP UP is required" after looking at
>>>>>> authentication, authorisation and many other real-time signals. It's just
>>>>>> not standardized...
>>>>>>
>>>>>>
>>>>>> On Sat, Oct 8, 2022 at 7:30 AM Pieter Kasselman <pieter.kasselman=
>>>>>> [e-mail]> wrote:
>>>>>>
>>>>>>> I am very supportive of this work and have been working through
>>>>>>> different use cases to see whether it can satisfy the requirements that
>>>>>>> arise from them.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> One observation from working through these uses cases is that as
>>>>>>> customers move to Zero Trust architectures, we are seeing customers
>>>>>>> adopting finer grained policy segmentation. Consequently customers are
>>>>>>> planning to deploy segmented access control by data or action sensitivity,
>>>>>>> within a service. This approach to policy design makes it more common for a
>>>>>>> single service to depend on multiple authentication context values or
>>>>>>> combinations of authentication context values.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> An example of this is a policy that has multiple acr values (e.g.
>>>>>>> acr1=password, acr2=FIDO, acr3=selfie check, acr4=trusted network). A
>>>>>>> customer may define a policy that requires different combinations of these
>>>>>>> acr values, for example, a file server may requires password for general
>>>>>>> access (e.g. acr1), FIDO authentication (acr2) or password access and being
>>>>>>> on a trusted network to read sensitive data (acr 2 of (acr1 + acr 4), FIDO
>>>>>>> authentication and password (acr1 + acr2) for accessing editing sensitive
>>>>>>> documents and a real-time selfie check on top of FIDO and presence on a
>>>>>>> trusted network  (acr1 + acr2 + acr3 + acr4) to initiate a sensitive
>>>>>>> workflow (e.g. check-in code). Other variations of this includes database
>>>>>>> access with different types of access requirement for certain rows
>>>>>>> (row-level permissions) or columns (column level permissions) with
>>>>>>> different combinations of acr values.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I was curious if this type of scenario where multiple authentication
>>>>>>> contexts and combinations of contexts are required is something others see
>>>>>>> (or are beginning to see) as well?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Cheers
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Pieter
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *From:* OAuth <[e-mail]> *On Behalf Of *Rifaat
>>>>>>> Shekh-Yusef
>>>>>>> *Sent:* Thursday, September 22, 2022 3:02 PM
>>>>>>> *To:* oauth <[e-mail]>
>>>>>>> *Subject:* Re: [OAUTH-WG] WGLC for Step-up Authentication
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Correction:*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Please, review the document and provide your feedback on the mailing
>>>>>>> list by *Oct 7th, 2022*.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Sep 22, 2022 at 9:52 AM Rifaat Shekh-Yusef <
>>>>>>> [e-mail]> wrote:
>>>>>>>
>>>>>>> All,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> This is to start a *WG Last Call *for the *Step-up Authentication *
>>>>>>> document:
>>>>>>>
>>>>>>> https://www.ietf.org/archive/id/draft-ietf-oauth-step-up-authn-challenge-03.html
>>>>>>> <https://urldefense.com/v3/__https://nam06.safelinks.protection.outlook.com/?url=https*3A*2F*2Fwww.ietf.org*2Farchive*2Fid*2Fdraft-ietf-oauth-step-up-authn-challenge-03.html&data=05*7C01*7Cpieter.kasselman*40microsoft.com*7C0078f809101147bc978308da9ca32020*7C72f988bf86f141af91ab2d7cd011db47*7C1*7C0*7C637994521713812011*7CUnknown*7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0*3D*7C3000*7C*7C*7C&sdata=18sfemyWqYb06PvUA9eTLaq0ccDY14*2F6ETo58JpE*2FJQ*3D&reserved=0__;JSUlJSUlJSUlJSUlJSUlJSUlJSUlJSUl!!PwKahg!537tJQfGj3Z_Yi2waywl1VPGyDs9818JE-M-KNFgPtoB0O26a7ksRvAYrPyzfKKXsMKCVblAomtRXj8$>
>>>>>>>
>>>>>>>
>>>>>>> Please, review the document and provide your feedback on the mailing
>>>>>>> list by *Sep 30th, 2022*.
>>>>>>>
>>>>>>> Regards,
>>>>>>>  Rifaat & Hannes
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> OAuth mailing list
>>>>>>> [e-mail]
>>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>> <https://urldefense.com/v3/__https://www.ietf.org/mailman/listinfo/oauth__;!!PwKahg!537tJQfGj3Z_Yi2waywl1VPGyDs9818JE-M-KNFgPtoB0O26a7ksRvAYrPyzfKKXsMKCVblAbcE1GME$>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> OAuth mailing list
>>>>>> [e-mail]
>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>
>>>>> _______________________________________________
>>>>> OAuth mailing list
>>>>> [e-mail]
>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>
>>>>
>>>> *CONFIDENTIALITY NOTICE: This email may contain confidential and
>>>> privileged material for the sole use of the intended recipient(s). Any
>>>> review, use, distribution or disclosure by others is strictly prohibited.
>>>> If you have received this communication in error, please notify the sender
>>>> immediately by e-mail and delete the message and any file attachments from
>>>> your computer. Thank you.*
>>>>
>>>> _______________________________________________
>>>> OAuth mailing [e-mail]://www.ietf.org/mailman/listinfo/oauth
>>>>
>>>>
>>>>
>>> *CONFIDENTIALITY NOTICE: This email may contain confidential and
>>> privileged material for the sole use of the intended recipient(s). Any
>>> review, use, distribution or disclosure by others is strictly prohibited.
>>> If you have received this communication in error, please notify the sender
>>> immediately by e-mail and delete the message and any file attachments from
>>> your computer. Thank you.*
>>>
>>>
>>>
>> *CONFIDENTIALITY NOTICE: This email may contain confidential and
>> privileged material for the sole use of the intended recipient(s). Any
>> review, use, distribution or disclosure by others is strictly prohibited.
>> If you have received this communication in error, please notify the sender
>> immediately by e-mail and delete the message and any file attachments from
>> your computer. Thank you.*_______________________________________________
>> OAuth mailing list
>> [e-mail]
>> https://www.ietf.org/mailman/listinfo/oauth
>>
>
>
> --
> Regards and Best Wishes
> Jaimandeep Singh
> LinkedIn <http://www.linkedin.com/in/jaimandeep-singh-07834b1b7>
>

-- 
_CONFIDENTIALITY NOTICE: This email may contain confidential and privileged 
material for the sole use of the intended recipient(s). Any review, use, 
distribution or disclosure by others is strictly prohibited.  If you have 
received this communication in error, please notify the sender immediately 
by e-mail and delete the message and any file attachments from your 
computer. Thank you._