Re: [OAUTH-WG] Token Revocation error codes

[Sergey Ponomarev <[e-mail]>]

Hi and sorry for raising the four years old topic.

As a recup I reported a SECURITY VULNERABILITY on OAuth 2
specification level. It's minor (I hope) but still seen in the real
world AS implementation.
In short, to logout a user the revocation endpoint is called with the
user's token. And by a the RFC7009 the AS must always return 200 Ok
status code even if the token is invalid:

> The authorization server responds with HTTP status code 200 if the token has been revoked successfully or if the client submitted an invalid token.
> Note: invalid tokens do not cause an error response since the client cannot handle such an error in a reasonable way.  Moreover, the purpose of the revocation request, invalidating the particular token, is already achieved.

So if a client just made an incorrect call e.g. token=null then it
will anyway receive a 200 OK and the user will think that logout was
successful and a session closed. But internally the token may be
stored in many places and even shared  between microservices/UI and
other parties and it will remain still working.

Can anybody take some actions and at least make some errata to the spec?

P.S. adding to CC authors of the spec

On Tue, 22 May 2018 at 20:29, Sergey Ponomarev <[e-mail]> wrote:
>
> What is also should be discussed and specified is revoking of expired token. For example in Keycloak you can invalidate a session by expired token:
>>
>> It should be possible to logout a session with a token that is expired. This is to make sure that a user can invalidate a session if there's a suspicion that the refresh/offline token has been leaked. In such a case it could be that the real user has an expired refresh token while an attacker has been able to refresh the token and obtain a new not expired refresh token.
>
>
> KEYCLOAK-3302
>
> Think this is doubtful but makes sense.
>
> To summarize: we have to create some threat model with description of possible use cases.
>
>
> On Tue, 22 May 2018 at 18:18, Sergey Ponomarev <[e-mail]> wrote:
>>
>> From OAuth perspective we can't say that the token should have some structure: they can be any random value in case of reference (opaque) tokens. But the Google's OAuth Server responds in this case with 400 error "invalid_token".
>> The same can be used for JWTs with invalid sign or issuer.
>> So it would be better if specification allow OAuth servers to respond with this error code if it clearly know that token was invalid by format.
>>
>> On Tue, 22 May 2018 at 17:51, Thomas Broyer <[e-mail]> wrote:
>>>
>>> IFF the server processes it!
>>> RFC 7009 says “An authorization server MAY ignore this parameter, particularly if it is able to detect the token type automatically.” which BTW is exactly my case.
>>>
>>> For months, my AS received requests with token=Array, and now receives requests with token=null. Those are clearly bugs in the client code, and because I return a 200 OK, the developers aren't aware of it.
>>>
>>> If tokens have an expected "structure", I think AS should probably return an error when the token value clearly is not a token (at one point I may change my implementation to do just that). As soon as it looks like a potential token though, then 200 OK sounds good to me.
>>>
>>> On Tue, May 22, 2018 at 4:34 PM Justin Richer <[e-mail]> wrote:
>>>>
>>>> In that specific case, the token_type_hint value is invalid and can be rejected as an invalid_request.
>>>>
>>>>  — Justin
>>>>
>>>>
>>>> On May 22, 2018, at 5:27 AM, Joseph Heenan <[e-mail]> wrote:
>>>>
>>>>
>>>> I think one important point Sergey raised was that the response to the client from submitting the wrong token is the same 200 response as submitting a valid token, and that hugely increases the chance that the developer of the client app might submit the wrong token and never realise. Making it easier for the developer of the client app to see that they've done something wrong and need to fix their implementation seems like a worthwhile goal to me, and that would appear to explain what google are thinking with their responses.
>>>>
>>>> An example of an easy to make error that would get a 200 response is getting the values the wrong way around, i.e. a body of:
>>>>
>>>>      token=refresh_token&token_type_hint=45ghiukldjahdnhzdauz
>>>>
>>>> (as token_type_hint may be ignored by the server.)
>>>>
>>>> The example Sergey gave of the developer accidentally sending the id token instead of the intended token seems quite likely to happen in the real world too, and a 200 response in that case does seem wrong to me.
>>>>
>>>>
>>>> Joseph
>>>>
>>>>
>>>> On 21 May 2018, at 22:29, Justin Richer <[e-mail]> wrote:
>>>>
>>>> I’m with George here: revocation is almost a best-effort request from the client’s perspective. It sends a message to the server saying “hey I’m done with this token, you can throw it out too”. If the server does revoke the token, the client throws it out. If the server doesn’t revoke the token? Then the client still throws it out. Either way the results from the client’s perspective are the same: it’s already decided that it’s done with the token before it talks to the server. It’s an optional cleanup step in most  OAuth systems.
>>>>
>>>>  — Justin
>>>>
>>>> On May 21, 2018, at 5:08 PM, George Fletcher <gffletch=[e-mail]> wrote:
>>>>
>>>> I'm not understanding how these different cases matter to the client? I doubt that the running code will be able to dynamically handle the error. So it seems this information is only relevant to the developers and not relevant from an end user and the client perspective.
>>>>
>>>> Also, for the 5 states you define, the effect of calling revocation is still that the token is "revoked" because the token is already not valid.
>>>>
>>>> So from an implementation perspective, where is the concern that developer will do the "wrong thing" without these more detailed error responses?
>>>>
>>>> Thanks,
>>>> George
>>>>
>>>> On 5/19/18 5:41 PM, Sergey Ponomarev wrote:
>>>>
>>>> Hi,
>>>>
>>>> I developing an implementation of back channel token revocation endpoint. And I think we should reconsider and probably change the specification to improve error handling.
>>>>
>>>> Here we see several situations of error state:
>>>> 1. token wasn't sent in request.
>>>> 2. token is invalid by format i.e. not JWT or JWT with invalid signature
>>>> 3. token is expired or token is even unknown
>>>> 4. token was already revoked
>>>> 5. token type is unsupported
>>>>
>>>> According to  RFC7009 OAuth 2.0 Token Revocation  section 2.2 Revocation Response:
>>>>
>>>>> The authorization server responds with HTTP status code 200 if the token has been revoked successfully or if the client submitted an invalid token.
>>>>> Note: invalid tokens do not cause an error response since the client cannot handle such an error in a reasonable way.  Moreover, the purpose of the revocation request, invalidating the particular token, is already achieved..
>>>>
>>>>
>>>> As you may see this section covers only case 3 and case 4 but it's very unclear: calling token as "invalid" is very broad definition.
>>>> I think we should take a look on each case separately:
>>>>
>>>> 1. token wasn't sent in request.
>>>> Most implementations returns 400 status code, error: "invalid_request", error_description": "Missing required parameter: token".
>>>> Note that returned error is not "invalid_token" but "invalid_request" and I think this should be correct behavior and should be clearly specified.
>>>>
>>>> 2. token is invalid by format i.e. not JWT or JWT with invalid signature
>>>> This error is mostly related to JWT but for reference (opaque) tokens can be also applied (e.g. token is too long).
>>>> Goolge OAuth returns 400 code with  "error": "invalid_token" and I think this is correct behavior.
>>>> The client can have a bug and sends invalid tokens so we should return an error response instead of 200 status.
>>>>
>>>> 3. token is expired or even unknown
>>>> Spec says that IdP should return 200 in this case but in case of unknown token this may be a symptom of a bug on client side. Even if IdP can clearly determine that token is expired (in case of JWT) this is hard to determine in case of reference token that was removed from DB.
>>>> So personally I think that from security perspective it's better to response with 400 status because client can have a bug when it's sends some unknown token and think that it was revoked while it wasn't.
>>>>
>>>> For example Google OAuth revocation endpoint implementation do not follow the spec and returns 400 Bad Request with error message "Token is revoked or expired".
>>>>
>>>> 4. token was already revoked
>>>> The same as above: this can be a bug in a client and we should return 400 status. In case of reference token which was removed from DB we can't distinguish that the token was revoked or even existed so this situation is the same as unknown token.
>>>>
>>>> 5. token type is unsupported
>>>> For this case specification introduces a new error code for case 5 in section 2.2.1. Error Response :
>>>>>
>>>>> unsupported_token_type:  The authorization server does not support the revocation of the presented token type.  That is, the client tried to revoke an access token on a server not   supporting this feature.
>>>>
>>>> But it would be better to mention that revocation of ID token (which can be is considered as "public" and not used to auth) definitely should cause this error.
>>>>
>>>> It would be great if we discuss this cases and improve specification.
>>>>
>>>> P.S. Also it may be worse to mention that specification says that content of successful response is empty but status code is 200 instead of 201 "No Content".
>>>>
>>>> Regards,
>>>> Sergey Ponomarev
>>>>
>>>>
>>>> _______________________________________________
>>>> OAuth mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>
>>>>
>>>> _______________________________________________
>>>> OAuth mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>
>>>>
>>>> _______________________________________________
>>>> OAuth mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>
>>>>
>>>> _______________________________________________
>>>> OAuth mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>
>>>>
>>>> _______________________________________________
>>>> OAuth mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>
>>> _______________________________________________
>>> OAuth mailing list
>>> [e-mail]
>>> https://www.ietf.org/mailman/listinfo/oauth
>>
>>
>>
>> --
>> Sergey Ponomarev, skype:stokito
>
>
>
> --
> Sergey Ponomarev, skype:stokito



-- 
Sergey Ponomarev,
stokito.com