[Pals] IP-VPN without IP/UDP header transportation

["Jeffrey (Zhaohui) Zhang" <[e-mail]>]

[changing subject]

Hi,

After filling in the signaling procedures for draft-zzhang-pals-pw-for-ip-udp-payload, we feel that BESS is a better home for the draft, so we rehomed it to BESS: https://datatracker.ietf.org/doc/draft-zzhang-bess-ipvpn-payload-only/.

Of course, it still benefits discussions in PALS/MPLS WG.

Thanks.
Jeffrey



Juniper Business Use Only
From: Jeffrey (Zhaohui) Zhang
Sent: Wednesday, June 22, 2022 4:30 PM
To: Christian Schmutzer (cschmutz) <cschmutz=[e-mail]>; mpls-chairs <[e-mail]>; [e-mail]; [e-mail]; SPRING WG <[e-mail]>
Cc: '[e-mail]' <[e-mail]>
Subject: RE: [bess] [Pals] [EXTERNAL] Re: [spring] Martini Pseudowires and SR

Regarding feature gaps, I’d like to point to https://datatracker.ietf.org/doc/html/draft-zzhang-pals-pw-for-ip-udp-payload-01 for a new kind of PW.
I had not got to socialize it in PALS/MPLS WG and will fill in the signaling details in the next revision (yes, EVPN-VPWS type of signaling is what I am thinking of).
Looks like this is a good email thread to tag on for my topic.

Appreciate your comments.

Thanks.
Jeffrey



Juniper Business Use Only
From: BESS <[e-mail]<mailto:[e-mail]>> On Behalf Of Christian Schmutzer (cschmutz)
Sent: Saturday, June 4, 2022 1:35 AM
To: mpls-chairs <[e-mail]<mailto:[e-mail]>>; [e-mail]<mailto:[e-mail]>; [e-mail]<mailto:[e-mail]>; SPRING WG <[e-mail]<mailto:[e-mail]>>
Subject: Re: [bess] [Pals] [EXTERNAL] Re: [spring] Martini Pseudowires and SR

[External Email. Be cautious of content]

<Resending with trimmed to/cc list to try to pass the BESS recipient restriction>

On 01.06.2022, at 09:42, Christian Schmutzer (cschmutz) <[e-mail]<mailto:[e-mail]>> wrote:

Hi,

After the initial hype for PWE3 in the early 2000s we have seen renewed interest in circuit emulation (TDM PWE3) in 2015 as there was (and still is) a lot of PDH and SONET/SDH infrastructure out there that operators can’t get rid of fast enough while those products go end of life.

We have invested in a modern, complete (SATOP, CESOP and CEP) and high-density MPLS/PWE3 implementation and several operators and utilities have deployed our solution (based on T-LDP PWE3).

Having said that, many operators raised the question on “why not EVPN-VPWS instead of T-LDP?” as they were already looking at EVPN-VPWS for ethernet services. As we see continued interest in our circuit emulation offering and this EVPN-VPWS question is continuously coming up I believe there is merit in addressing TDM pseudowire setup via EVPN-VPWS.

Also more recently we got requests to carry high speed “pipes” such as 10GE, 100GE, OC192/STM64 and various FibreChannel variants in a transparent manner which lead to our PLE data plane proposal documented in https://datatracker.ietf.org/doc/html/draft-schmutzer-bess-ple<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/html/draft-schmutzer-bess-ple__;!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7RvgObuTe$>.

For PLE (being new) we looked at EVPN-VPWS to start with (instead of T-LDP) and also already started a proposal via https://datatracker.ietf.org/doc/html/draft-schmutzer-bess-ple-vpws-signalling<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/html/draft-schmutzer-bess-ple-vpws-signalling__;!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7Rn59D532$>. The proposal is not re-inventing the wheel, rather aligning with the concepts defined in T-LDP. We would appreciate community review and input.

I think draft-schmutzer-bess-ple-vpws-signalling can address the “TDM’ish” features while another document or updates to RFC8214 could address the other (more generic gaps) to RFC8077 and other T-LDP RFCs.

Regards
Christian

On 31.05.2022, at 18:52, Ketan Talaulikar <[e-mail]<mailto:[e-mail]>> wrote:

+ 1 to Sasha and Jorge

The feature gaps to be addressed in BGP EVPN VPWS should be based on operators' feedback so we add only those that are relevant.

Thanks,
Ketan


On Tue, May 31, 2022 at 4:59 PM Alexander Vainshtein <[e-mail]<mailto:[e-mail]>> wrote:
Jorge and all,
Here is a (admittedly incomplete) list of things that, AFAIK, today are not supported with EVPN VPWS:

  1.  All the non-Ethernet PW types (28 such types can be found in the IANA registry<https://urldefense.com/v3/__https:/www.iana.org/assignments/pwe3-parameters/pwe3-parameters.xhtml*pwe3-parameters-2__;Iw!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7Rqbfe_ps$>)

     *   Not sure if all these types are relevant for the industry today
     *   AFAIK, TDM and SONET over packet are still widely deployed

  1.  Differentiation between Raw and Tagged Ethernet PW types (not sure it is needed, but still)
  2.  All Interface Attributes listed in the IANA registry with the following exclusions:

     *   Interface MTU  (EVPN VPWS supports a standard way to ignore it which IMHO is one great advantage over LDP-based signaling)
     *   Flow Label (support is defined in 7432bis)

  1.  Full-blown PW status signaling
  2.  FCS retention – not sure it is used these days
  3.  PW fragmentation and reassembly - not sure it is used these days.

Regards,
Sasha

Office: [phone]
Cell:      [phone]
Email:   [e-mail]<mailto:[e-mail]>

From: Rabadan, Jorge (Nokia - US/Sunnyvale) <[e-mail]<mailto:[e-mail]>>
Sent: Monday, May 30, 2022 1:02 PM
To: Alexander Vainshtein <[e-mail]<mailto:[e-mail]>>; Stewart Bryant <[e-mail]<mailto:[e-mail]>>; Andrew Alston - IETF <andrew-ietf=[e-mail]<mailto:[e-mail]>>; mpls-chairs <[e-mail]<mailto:[e-mail]>>
Cc: SPRING WG <[e-mail]<mailto:[e-mail]>>; [e-mail]<mailto:[e-mail]>; [e-mail]<mailto:[e-mail]>
Subject: Re: [Pals] [EXTERNAL] Re: [spring] Martini Pseudowires and SR

I concur with Sasha.
We’ve been gone through a significant effort to unify the service signaling by using EVPN. If we are missing anything in EVPN VPWS compared to T-LDP based PWs, I would rather look at extending EVPN VPWS (if needed). If not an option, it would good to discuss at least why EVPN VPWS is not an option.

Thanks,
Jorge


From: Pals <[e-mail]<mailto:[e-mail]>> on behalf of Alexander Vainshtein <[e-mail]<mailto:[e-mail]>>
Date: Monday, May 30, 2022 at 10:58 AM
To: Stewart Bryant <[e-mail]<mailto:[e-mail]>>, Andrew Alston - IETF <andrew-ietf=[e-mail]<mailto:andrew-ietf=[e-mail]>>, mpls-chairs <[e-mail]<mailto:[e-mail]>>
Cc: SPRING WG <[e-mail]<mailto:[e-mail]>>, [e-mail]<mailto:[e-mail]> <[e-mail]<mailto:[e-mail]>>, [e-mail]<mailto:[e-mail]> <[e-mail]<mailto:[e-mail]>>
Subject: Re: [Pals] [EXTERNAL] Re: [spring] Martini Pseudowires and SR
Stewart, Andrew and all,
++ Bess WG.
I fully agree that using (targeted) LDP for setup of Martini PWs in an SR-based environment is quite problematic for the operators.

One alternative is transition to setup of PWs using MP BGP based on the EVPN-VPWS mechanisms (RFC 8214<https://urldefense.com/v3/__https:/clicktime.symantec.com/3Qviu2KUub4f1w6MeHVbgcu6H4?u=https*3A*2F*2Fdatatracker.ietf.org*2Fdoc*2Fhtml*2Frfc8214__;JSUlJSUl!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7Ro3QiEqc$>).

These mechanisms probably require some extension to support PWs that carry non-Ethernet customer traffic as well as support of some features that can be signaled via LDP for Ethernet PWs but cannot be signaled today with EVPN-VPWS (e.g., FCS retention – RFC 4720<https://urldefense.com/v3/__https:/clicktime.symantec.com/32Jf7wnYMxKQPc3r3RR9Cy96H4?u=https*3A*2F*2Fdatatracker.ietf.org*2Fdoc*2Fhtml*2Frfc4720__;JSUlJSUl!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7RrpsbXYX$>).

My guess is that, once the basic EVPN-VPWS signaling is supported, migration of LDP-signaled PWs to EVPN-VPWS would be simple enough.

This work, if approved, would require intensive cooperation between PALS WG and BESS WG.

My 2c,
Sasha

Office: [phone]
Cell:      [phone]
Email:   [e-mail]<mailto:[e-mail]>

From: Pals <[e-mail]<mailto:[e-mail]>> On Behalf Of Stewart Bryant
Sent: Monday, May 30, 2022 11:10 AM
To: Andrew Alston - IETF <andrew-ietf=[e-mail]<mailto:andrew-ietf=[e-mail]>>; [e-mail]<mailto:[e-mail]>; mpls-chairs <[e-mail]<mailto:[e-mail]>>
Cc: SPRING WG <[e-mail]<mailto:[e-mail]>>
Subject: [EXTERNAL] Re: [Pals] [spring] Martini Pseudowires and SR

Including the PALS and MPLS WGs in the discussion.

In the case of PWs, LDP runs directly between the T-PEs to provide the control plane. If it is known that the only use of LDP is to support PW, then a lightweight profile of LDP might be implemented, ignoring unused parts, but this does not necessarily need a standard.

Before you can profile LDP, you have to also profile PWs to determine which subset of the PW system you need to support. The danger here is that you end up going through the PW development cycle again as old requirements re-emerge.

Stewart



Sent from my iPad

On 30 May 2022, at 07:22, Andrew Alston - IETF <andrew-ietf=[e-mail]<mailto:andrew-ietf=[e-mail]>> wrote:

Hi All,

Sending this email wearing only the hat of a working group participant.

One of the things that our network uses, and is used by so many networks out there, are martini based pseudowires (which for clarity are generally setup using what is described in RFC8077).  In an SR world however, this creates a problem, because typically you don’t want to run LDP in an SR context.  This means that standard martini pseudowires no longer function.  This gets even more complicated when you want to do martini based pseudowires over an IPv6 only network, particularly considering the lack of widespread support for LDP6.

This is also relevant in cases where networks wish to run SR-MPLS in the absence of SRv6 for whatever reason.

So, my question to the working group is this:

Is it worth looking at creating a form of LDP light – both compatible with IPv4 and IPv6 – that simply exists to setup and tear down the service labels for point to point services.  A form of targeted LDP without all the other complexities involved in LDP – that could potentially run at a lower preference than LDP itself (so if LDP is there, use it, if not use this)

Before I start drafting though, I would like to hear from the working group if there are others who feel that this is worth doing and, call this a call for expressions of interest in those who may be willing to work towards something like this.  Happy to take emails on list or off list and see if we can find a solution.

Looking forward to hearing from you all

Thanks

Andrew



_______________________________________________
spring mailing list
[e-mail]<mailto:[e-mail]>
https://clicktime.symantec.com/3Dg1AP6FnSDeshweMg29hXi7GS?u=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Fspring<https://urldefense.com/v3/__https:/clicktime.symantec.com/3Dg1AP6FnSDeshweMg29hXi7GS?u=https*3A*2F*2Fwww.ietf.org*2Fmailman*2Flistinfo*2Fspring__;JSUlJSUl!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7RmTzmP3Q$>

Notice: This e-mail together with any attachments may contain information of Ribbon Communications Inc. and its Affiliates that is confidential and/or proprietary for the sole use of the intended recipient. Any review, disclosure, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please notify the sender immediately and then delete all copies, including any attachments.

Notice: This e-mail together with any attachments may contain information of Ribbon Communications Inc. and its Affiliates that is confidential and/or proprietary for the sole use of the intended recipient. Any review, disclosure, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please notify the sender immediately and then delete all copies, including any attachments.

Notice: This e-mail together with any attachments may contain information of Ribbon Communications Inc. and its Affiliates that is confidential and/or proprietary for the sole use of the intended recipient. Any review, disclosure, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please notify the sender immediately and then delete all copies, including any attachments.
_______________________________________________
BESS mailing list
[e-mail]<mailto:[e-mail]>
https://www.ietf.org/mailman/listinfo/bess<https://urldefense.com/v3/__https:/www.ietf.org/mailman/listinfo/bess__;!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7RoJPjo72$>
_______________________________________________
BESS mailing list
[e-mail]<mailto:[e-mail]>
https://www.ietf.org/mailman/listinfo/bess<https://urldefense.com/v3/__https:/www.ietf.org/mailman/listinfo/bess__;!!NEt6yMaO-gk!DlYfLfhLreAoyF1YRUnoLvSQMd3DO8AOA4GFDdsQmL4gqY9Q3BySRnQHgGTXedeK_UEpQvd1hOyKvv0AF1V4NR_7RoJPjo72$>