Re: [clue] CLUE Data Channel: SDP Offer/Answer Proceudres

["Liuyan (Scarlett)" <[e-mail]>]

Hi Paul,

   Please see about the static and dynamic assignment of channels as below. Thanks.

Best Regards,
Scarlett

-----Original Message-----
From: clue [mailto:[e-mail]] On Behalf Of Paul Kyzivat
Sent: Monday, February 17, 2014 12:09 PM
To: [e-mail]
Subject: Re: [clue] CLUE Data Channel: SDP Offer/Answer Proceudres

On 2/16/14 8:35 PM, Christian Groves wrote:
> Hello Christer,
>
> Please see below.
>
> Regards, Christian
>
> On 17/02/2014 12:11 PM, Christer Holmberg wrote:
>> Hi,
>>
>> If the offerer offers a data channel, AND also some way indicates 
>> support of CLUE, we can always specify that the offerer MUST be able 
>> to use the data channel for CLUE. The WebRTC data channel protocol 
>> can then be used to open the channel for CLUE.
> [CNG] I agree.
>
> I'm still uncomfortable with the way these drafts are layered.

I'm troubled too, but maybe not exactly the same way you are.
IMO it isn't that the layering is so wrong. Rather it is that the terminology used is confusing.

> The SCTP
> draft allows the specification of "app"s that relate to the SCTP 
> association as a means of negotiating what goes in the SCTP association.
> One of those "app"s may be the webrtc data channel. It has its own 
> means of negotiating of what is in the SCTP association (i.e. 
> Richard's draft).

I agree with your interpretation here. That doesn't mean the layering is wrong - just the terminology.

The use of a=sctpmap is clearly intended as an analog to a=rtpmap. But in reality its purpose is not at all analogous to a=rtpmap. So the name confuses.

And that mis-analogy is continued, by language that says sctpmap is defining a mapping from a port number to a payload format. Again, that is not what it is doing. (If it were, then you would be restricted to one payload format for all the streams on the association.) AFAICT, the name you are giving in sctpmap describes some sort of "convention" for how all the streams in the association are to be managed and used. E.g., "webrtc-datachannel" says that the streams will be managed in pairs, as channels, and that webrtc data channel protocol may be used to dynamically assign channels. (That is the same conclusion you have reached.)

IMO a lot of the language should be changed to be less confusing.

> Both these methods are basically just indicating what will be in the 
> SCTP streams.

Both? Which? The only thing that actually says, in SDP, what will be in the individual SCTP streams is Richard's draft.

> Rather than have two methods for negotiating what is in the SCTP 
> association it almost seems better to have one method for negotiation 
> of what apps there are and then to tag whether or not the webrtc data 
> channel will be used to open it.
>
> e.g.
>
> m=application 54111 SCTP/DTLS 54111
> a=sctpmap:54111 stream=2;label="CLUE 1"; subprotocol="CLUE"; 
> max_retr=3; webrtc-datachannel-tag
> a=webrtc-datachannel:max-message-size=100000 streams=1
>
> webrtc-datachannel-tag would take whether an "app" uses the webrtc 
> data channel open protocol.
> a=webrtc-datachannel attribute would give the attributes of the protocol.

There are problems with this - not for CLUE, but for webrtc, or anything that doesn't want to use O/A to define every channel.

The webrtc data channel open protocol does not take a stream ID as an argument. It internally assigns stream IDs. Rtcweb has specified how you can use preassigned channels without the open, but then it isn't using the data channel protocol.

IMO, from an mmusic perspective, we need to support both the static and dynamic assignment of channels. We just want it to be done more clearly.

 From a CLUE perspective, we need to decide if we want to use the static or dynamic assignment. IMO the preferred choice is not obvious - both have their attractions. At the moment I am *slightly* preferring the dynamic.
[Scarlett] I am not sure about the static or dynamic assignment of data channels.
Maybe the static assignment of data channel is as below：
1) According to the draft-ejzak-dispatch-webrtc-data-channel-sdpneg-00 draft, the stream id for webrtc data channel is given in SDP offer in spite of the SCTP association has not been established. 2) After the webrtc clients have finished SDP offer/answer, the SCTP association will be established. And then the data channel's state will be set open.

The dynamic assignment of data channel is as below；
1) According to the draft-ietf-mmusic-sctp-sdp-05 draft, if an SDP offer with a DTLS/SCTP request is answered successfully the corresponding SCTP association will be established.
2) According to the draft-ietf-rtcweb-data-protocol-01 draft, the webrtc client will open a data channel using an unused stream id from the stream ids of the SCTP association. 


	Thanks,
	Paul

>>
>> But, never the less, it would probably be good to have an example 
>> showing how things would look like using Richard's draft, until we've 
>> decided whether we are going to use it or not. I'll add that.
>>
>> Regards,
>>
>> Christer
>>
>> Sent from my Sony Ericsson Xperia arc S
>>
>> Christian Groves <[e-mail]> wrote:
>>
>>
>> Hello Christer,
>>
>> I think that for the signaling we must specify a way of negotiating 
>> at the SDP level whether CLUE is supported. I agree there's lots of 
>> ways it could be done but we need to indicate which one/s CLUE should use.
>>
>> So for the SDP O/A procedures and example I think you have to assume 
>> the use of draft-ejzak-mmusic-data-channel-sdpneg otherwise you can't 
>> say its a CLUE data channel according to the SDP given. You're just 
>> opening a generic channel, which may or may not be clue. Particularly 
>> in the Answerer's case, it doesn't know that the Offer is going to 
>> use the channel for CLUE.
>>
>> However:
>> m=application 54111 SCTP/DTLS 54111
>> a=sctpmap:54111 webrtc-datachannel max-message-size=100000 streams=1
>> a=dcmap:54111 stream=2;label="CLUE 1"; subprotocol="CLUE"; max_retr=3
>>
>> would unambiguously define it as a CLUE data channel.
>>
>> Regards, Christian
>>
>> On 17/02/2014 11:16 AM, Christer Holmberg wrote:
>>> Hi Christian,
>>>
>>> If you want to negotiate usage of CLUE (or, any other specific usage 
>>> of a webrtc-datachannel) in SDP, one option is to use Richard's 
>>> draft. The usage of that draft is listed as an open issue in the 
>>> CLUE data channel draft.
>>>
>>> SIP also provides other mechanisms, e.g. media feature tags, for 
>>> indicating support of features.
>>>
>>> Regards,
>>>
>>> Christer
>>>
>>> Sent from my Sony Ericsson Xperia arc S
>>>
>>> Christian Groves <[e-mail]> wrote:
>>>
>>>
>>> Hello Christer,
>>>
>>> With the use of webrtc-datachannel how do I negotiate via SDP 
>>> whether I want to use clue or not?
>>>
>>> A SCTP association (and thus webrtc-datachannel) for example could 
>>> be used for BFCP,CLUE and T.38. It seems wasteful to establish the 
>>> SCTP association to figure out that the endpoints support 
>>> webrtc-datachannel put don't support the application that you want.
>>>
>>> In the example in section 4.6 there's no way of distinguishing that 
>>> description for CLUE vs BFCP vs anything else. Its not a CLUE data 
>>> channel is a generic data channel.
>>>
>>> Regards, Christian
>>>
>>> On 16/02/2014 1:03 AM, Christer Holmberg wrote:
>>>> Hi,
>>>>
>>>> The draft submission deadline has passed, but I still wrote some 
>>>> more text, shown below, for the SDP Offer/Answer Procedures section.
>>>>
>>>> Regards,
>>>>
>>>> Christer
>>>>
>>>> PS. Note that I will be on vacation next week, so I will once again 
>>>> do my best trying to stay away from e-mails :)
>>>>
>>>> -----------------------
>>>>
>>>> 4.  SDP Offer/Answer Procedures
>>>>
>>>> 4.1.  General
>>>>
>>>>       This section describes how the SDP media description ("m=") 
>>>> line for
>>>>       a CLUE data channel is created, and how it is used in SDP 
>>>> offers and
>>>>       answers.
>>>>
>>>>       NOTE: The proceudres associated with "m=" lines for other 
>>>> media types
>>>>       (e.g. audio and video) used in a CLUE session are outside the 
>>>> scope
>>>>       of this document.
>>>>
>>>>       OPEN ISSUE #3: It is FFS whether the SDP-based WebRTC Data 
>>>> Channel
>>>>       Negotiation mechanism
>>>> [I-D.ejzak-dispatch-webrtc-data-channel-sdpneg]
>>>>       will be used with the CLUE data channel.
>>>>
>>>>       NOTE: If [I-D.ejzak-dispatch-webrtc-data-channel-sdpneg] will 
>>>> be used
>>>>       with the CLUE data channel, a new associated 'sub-protocol' value
>>>>       needs to be registered with IANA.
>>>>
>>>> 4.2.  SDP Media Description Fields
>>>>
>>>>       The field values of the "m=" line for the CLUE data channel 
>>>> are set
>>>>       as following:
>>>>
>>>>
>>>> +----------------+----------------+------------------------+----------------+
>>>>
>>>>       |     media      |      port         |
>>>> proto               |      fmt         |
>>>>
>>>> +----------------+----------------+------------------------+----------------+
>>>>
>>>>       | "applicationS |   DTLS port   | "UDP/TLS/UDPTL" |   SCTP
>>>> port   |
>>>>       |                    |     value
>>>> |                             |     value       |
>>>>
>>>> +----------------+----------------+------------------------+---------------+
>>>>
>>>>
>>>>                         Table 1: SDP "proto" field values
>>>>
>>>> 4.3.  SDP sctpmap Attribute
>>>>
>>>>       The field values of the SDP sctpmap attribute associated with the
>>>>       CLUE data channel "m=" are set as following:
>>>>
>>>>
>>>> +---------------------+---------------------------+-----------------------+---------+
>>>>
>>>>       | sctpmap-number |         app                  |
>>>> max-message-size | stream |
>>>>
>>>> +---------------------+---------------------------+-----------------------+---------+
>>>>
>>>>       |  fmt value of       | "webrtc-datachannel" |
>>>> Implemenation     |  "1"     |
>>>>       | the "m=" line      |                                |
>>>> specific             |           |
>>>>
>>>> +---------------------+---------------------------+-----------------------+---------+
>>>>
>>>>
>>>>                         Table 2: SDP "proto" field values
>>>>
>>>> 4.4.  SDP Offerer Procedures
>>>>
>>>>       The procedures for the offerer follow the normal proceures 
>>>> defined in
>>>>       [ref-to-3264].
>>>>
>>>>       When the offerer creates an offer, which contains an "m=" 
>>>> line for a
>>>>       CLUE data channel, it assigns the field values to the "m=" line
>>>>       according to the procedures in Section 4.2.  In addition, the 
>>>> offerer
>>>>       MUST insert an SDP sctpmap attribute associated with the "m="
>>>> line.
>>>>
>>>>       In an offer, the offerer MUST NOT insert more than one "m="
>>>> line for
>>>>       a CLUE data channel.
>>>>
>>>>       NOTE: CLUE does not support the usage of multiple CLUE data 
>>>> channels.
>>>>
>>>>       The offerer MUST NOT insert more than one SDP sctpmap 
>>>> attributes in
>>>>       an "m=" line for a CLUE data channel.
>>>>
>>>>       If an offerer, in a subsequent offer, wants to disable the 
>>>> CLUE data
>>>>       channel, it assigns a zero port value to the "m=" line associated
>>>>       with the CLUE data channel.  The answerer MUST NOT insert an SDP
>>>>       sctpmap attribute associated with the "m=" line.
>>>>
>>>> 4.5.  SDP Answerer Procedures
>>>>
>>>>       The procedures for the answerer follow the normal proceures 
>>>> defined
>>>>       in [ref-to-3264].
>>>>
>>>>       If the answerer receives an offer, which contains an "m=" 
>>>> line for a
>>>>       CLUE data channel, and the answerer accepts the "m=" line, it 
>>>> creates
>>>>       and inserts an "m=" line in the associated answer.  The answerer
>>>>       assigns the field values to the "m=" line according to the 
>>>> procedures
>>>>       in Section 4.2.
>>>>
>>>>       If, in the offer, a zero port value has been assigned to the "m="
>>>>       line for the CLUE channel, or it the answerer does not accept the
>>>>       "m=" line, but accepts other "m=" lines in the offer (i.e. the
>>>>       answerer will not reject the whole offer), it still inserts 
>>>> an "m="
>>>>       line for a CLUE data channel in the associated answer.  The 
>>>> answerer
>>>>       then assigns a zero port value to the "m=" line.  The 
>>>> answerer MUST
>>>>       NOT insert an SDP sctpmap attribute associated with the "m="
>>>> line.
>>>>
>>>> 4.6.  Example
>>>>
>>>>            m=application 54111 SCTP/DTLS 54111
>>>>            a=sctpmap:54111 webrtc-datachannel
>>>> max-message-size=100000 streams=1
>>>>
>>>>              Figure 1: SDP Media Description for a CLUE data 
>>>> channel
>>>>
>>>> _______________________________________________
>>>> clue mailing list
>>>> [e-mail]
>>>> https://www.ietf.org/mailman/listinfo/clue
>>>>
>>> _______________________________________________
>>> clue mailing list
>>> [e-mail]
>>> https://www.ietf.org/mailman/listinfo/clue
>>>
>>
>
> _______________________________________________
> clue mailing list
> [e-mail]
> https://www.ietf.org/mailman/listinfo/clue
>

_______________________________________________
clue mailing list
[e-mail]
https://www.ietf.org/mailman/listinfo/clue