RE: [Speermint] Updated Draft: SPEERMINT Peering Architecture

["Stastny Richard" <[e-mail]>]

Sohel,

I posted this already on Friday, but I think everybody
(including me) lost track already;-)

So here once again:

"May I try my summary: the Location function is a process containing
eventually more then one step:

"If you start with the CRD (e.g a SIP AoR entered by the User 
or derived from ENUM)"

Remark: Whith this I ment that the E.164 to SIP URI mapping
is already done, because this is out-of-scope of SPEERMINT.
In addition, SPEERMINT MUST be able to work in the same way
if the user has entered a SIP URI direct. This is why I prefer
that the result of an ENUM query is an AoR and not directly
the ingress element to the destination network.


"1. The AoR gives you the destination network 

2. You need to locate the peering club (= federation) for 
exchanging SIP messages (L5 )with the destination network

3. so you need to locate the policy you want to use and 
make a decision on the federation
(note: a destination network may belong to more then one federations)"
(Remark: both origination network and destination network
may be members of more then one federation. They may
need to locate a common one. If more then one federation
is in common, it is the choice of the origination network
to select one - So the Policy Function is embedded in the LF)

4.  "having chosen a federation, you need to locate the ingress 
proxy(ies) the destination network is using within this federation.

5. If you are using a separate peering for exchanging media, you now may
locate these"

Additional remark: In step 4. and 5. some geographic
location magic could come into play as requested by
some on this list.

Regards
Richard

> -----Original Message-----
> From: Khan, Sohel Q [CTO] [mailto:[e-mail]]
> Sent: Monday, May 29, 2006 4:30 PM
> To: Stastny Richard
> Cc: [e-mail]
> Subject: RE: [Speermint] Updated Draft: SPEERMINT Peering Architecture
> 
> Richard,
> 
> Would you please describe what LF should perform (in your opinion)?
> 
> 
> Thanks,
> 
> Sohel
> 
> -----Original Message-----
> From: Stastny Richard [mailto:[e-mail]]
> Sent: Sunday, May 28, 2006 3:07 AM
> To: Khan, Sohel Q [CTO]
> Cc: [e-mail]
> Subject: Re: [Speermint] Updated Draft: SPEERMINT Peering Architecture
> 
> I do not know how often I stated here that numbering issues (and
> therefore also NUMBER Portability issues) are out-of-scope in
SPEERMINT
> 
> So NUMBER Portablility cannot ne addressed in SPEERMINT LF
> 
> Or we change the SPEERMINT charter
> 
> Richard
> 
> ________________________________
> 
> Von: Khan, Sohel Q [CTO] [mailto:[e-mail]]
> Gesendet: So 28.05.2006 06:48
> An: Stastny Richard; Reinaldo Penno
> Cc: [e-mail]
> Betreff: RE: [Speermint] Updated Draft: SPEERMINT Peering Architecture
> 
> 
> 
> I think issues of mobility and number portability need to be addressed
> together in SPEERMINT LF.
> 
> Sohel Khan, Ph.D.
> Sprint-Nextel
> 
> -----Original Message-----
> From: "Stastny Richard" <[e-mail]>
> To: "Reinaldo Penno" <[e-mail]>
> Cc: "[e-mail]" <[e-mail]>
> Sent: 5/27/06 4:52 PM
> Subject: RE: [Speermint] Updated Draft: SPEERMINT Peering Architecture
> 
> What question?
> Richard
> 
> ________________________________
> 
> Von: Reinaldo Penno [mailto:[e-mail]]
> Gesendet: Sa 27.05.2006 23:46
> An: Stastny Richard
> Cc: [e-mail]
> Betreff: RE: [Speermint] Updated Draft: SPEERMINT Peering Architecture
> 
> 
> 
> Apart form your outside-of-the-us rhetoric the questions remains.
> 
> > -----Original Message-----
> > From: Stastny Richard [mailto:[e-mail]]
> > Sent: Saturday, May 27, 2006 2:38 PM
> > To: Reinaldo Penno
> > Cc: [e-mail]
> > Subject: Re: [Speermint] Updated Draft: SPEERMINT Peering
Architecture
> >
> > ENUM issues should not be discussed in SPEERMINT, just some
questions
> >
> > >Enum? When I dial [phone], what is there to resolve _inside_
> the
> > >wireless network that owns this number apart from the location of
the
> 
> > >user?
> >
> > and _outside_?
> > ENUM is about numbers like [phone]
> >
> > hello, we are talking E.164 numbers in ENUM, which is international
> > numbers
> >
> > >Now, in the scenario where an external call (for example, a
cingular
> > >customer calling a Verizon customer (which owns an original
t-mobile
> > >number). How that works today? If you say ENUM I would stand
> corrected
> > >(and surprised), since LNP has been fully deployed since 2003.
> >
> > Cingular?Verizon? ...
> >
> > we are talking about a global solution here You are a bit US centric
> > here, there is also some 200 other nations ozt there.
> >
> > I have no access to the US LNP database from e.g. Austria
> >
> > So you want to consider US national databases only in speermint?
> >
> > Richard
> >
> >
> >
> > ________________________________
> >
> > Von: Reinaldo Penno [mailto:[e-mail]]
> > Gesendet: Sa 27.05.2006 21:30
> > An: Stastny Richard; Otmar Lendl
> > Cc: [e-mail]
> > Betreff: RE: [Speermint] Updated Draft: SPEERMINT Peering
Architecture
> >
> >
> >
> > Enum? When I dial [phone], what is there to resolve _inside_
> the
> > wireless network that owns this number apart from the location of
the
> > user?
> >
> >
> > Now, in the scenario where an external call (for example, a cingular
> > customer calling a Verizon customer (which owns an original t-mobile
> > number). How that works today? If you say ENUM I would stand
corrected
> 
> > (and surprised), since LNP has been fully deployed since 2003.
> >
> > When a user takes its number with them, I assumed this punches a
whole
> 
> > in the telephone prefix hierarchy and a specific entry somewhere is
> > needed.
> >
> > Regards,
> >
> > Reinaldo
> >
> >
> > > -----Original Message-----
> > > From: Stastny Richard [mailto:[e-mail]]
> > > Sent: Saturday, May 27, 2006 4:26 AM
> > > To: Reinaldo Penno; Otmar Lendl
> > > Cc: [e-mail]
> > > Subject: Re: [Speermint] Updated Draft: SPEERMINT Peering
> Architecture
> > >
> > > >I wonder how
> > > >LNP is solved within wireless...A specific entry for each phone?
> That
> > > >would be crazy.
> > >
> > > Ahem, ENUM?
> > >
> > > I thought that is all what ENUM is about?
> > >
> > > Richard
> > >
> > >
> > > ________________________________
> > >
> > > Von: Reinaldo Penno [mailto:[e-mail]]
> > > Gesendet: Sa 27.05.2006 11:04
> > > An: Otmar Lendl; Patrick Melampy
> > > Cc: Khan, Sohel Q [CTO]; [e-mail]
> > > Betreff: RE: [Speermint] Updated Draft: SPEERMINT Peering
> Architecture
> > >
> > >
> > >
> > > Hello,
> > >
> > > I believe the crux of the problem was missed.
> > >
> > > The issue is not really the number of domains. We have today some
> > > 400.000.000 million hosts on the Internet. BGP peers to do not
> > exchange
> > > 400.000.000 million routes, they exchange in the low hundreds of
> > > thousands.
> > >
> > > And why is that? (I guess you know where I'm getting at). That's
> > because
> > > IP addresses lend themselves very well to hierarchical deployment,
> > > compression through prefix/CIDR usage and the like. DNS names are
> > > strings and hence difficult to come up with a similar scheme.
> > >
> > >
> > > I believe that if domains need to be exchanged between peers:
> > >
> > > 1 - Just a limited set would be exchanged and a "default layer 5
> > route"
> > > (equivalent to a traditional default route) would be used.
> > >
> > > 2 - Compression schemes like *.company.com, regular expressions or
> the
> > > like would need to be used. Having specific routes to AORs would
be
> > > hairy (maybe for the eventual roaming or visiting user). I wonder
> how
> > > LNP is solved within wireless...A specific entry for each phone?
> That
> > > would be crazy.
> > >
> > > 3 - Some new scheme that will make somebody rich....until then..
> > >
> > > I believe subscriptions would be used to exchange mostly "cost"
and
> > > policy information and some domains. I use cost here in the layer
3
> > > sense (number of calls, jitter, whatever). Cost would be an
abstract
> 
> > > value or a more specific one (up to the administrator).
> > >
> > > Regards,
> > >
> > > Reinaldo
> > >
> > > > -----Original Message-----
> > > > From: Otmar Lendl [mailto:[e-mail]]
> > > > Sent: Saturday, May 27, 2006 1:29 AM
> > > > To: Patrick Melampy
> > > > Cc: 'Khan, Sohel Q [CTO]'; [e-mail]
> > > > Subject: Re: [Speermint] Updated Draft: SPEERMINT Peering
> > Architecture
> > > >
> > > > On 2006/05/26 18:05, Patrick Melampy <[e-mail]>
> > wrote:
> > > > > I suppose like in any distributed routing protocol, there are
> some
> > > > chicken
> > > > > an egg issues. But consider the following.
> > > > >
> > > > > PREREQUISITES:
> > > > > 1.) You know the destination DOMAIN from either ENUM or other
> > means.
> > > >
> > > > [...]
> > > > >
> > > > > This technique is very similar to TRIP, only its for DOMAINS
and
> > not
> > > > partial
> > > > > E.164 numbers.
> > > >
> > > > [...]
> > > >
> > > > > Obviously, the data set could get large, as the list of
domains
> > can
> > > be
> > > > > really big. There are some possibilities here...
> > > >
> > > > Let's do a quick estimate on the number of domains involved:
> > > >
> > > > Right now, operators usually give customers URIs of the form
> > > > <number>@<providerdomain>. As long as this is the state of
> affairs,
> > > > we're fine as the number of providers is quite finite (a few
> > > > thousands, perhaps).
> > > >
> > > > This is like the state of affairs with respect to email, anno
> 1990.
> > > > Back then customers started to notice that if they use their own
> > > domain
> > > > for email, then they can switch providers without having to
change
> 
> > > > their email address. Thus a *lot* of people opted to use their
own
> 
> > > > domain for email.
> > > >
> > > > My guess is that the same will happen to SIP. Once customers
print
> 
> > > > their SIP uris on business cards, they will want to use their
own
> > > > domains. If providers won't support that feature then I suspect
> that
> > > > the regulators will step in and mandate an URI portability
> solution
> > > > just as they did in the PSTN with respect to numbers from number
> > > blocks.
> > > > (This could get really nasty protocol-wise, so I guess using
> > customer-
> > > > owned domains is the far better and likelier solution to the
> porting
> > > > question.)
> > > >
> > > > So: Anything we come up with here in SPEERMINT needs to cope
with
> a
> > > > scenario where the use of customer domains in SIP URIs is just
as
> > > > widespread as it is for email.
> > > >
> > > > How many domains are used for email? That's hard to say. There
are
> 
> > > > about 60 million gTLD domains and probably more than 20 ccTLD
> ones.
> > > > Assuming that only a tenth of that is used for email we're at
> > > > 8 million domains. Given the exponential growth any system which
> > > > doesn't scale to at least 10 million domains will be obsolete
> before
> > > > the ink is dry on the RFC.
> > > >
> > > > So what happens if we do some sort of BGP or TRIP with domains?
> > > >
> > > > Let's say we need at least 100 bytes of state information per
> > domain.
> > > > That makes a full routing table 1 GB worth of data. That also
> means
> > > > that a new border element needs to exchange that amount of data
> > > > with its peers before it has learned the current state of the
> > > > routing table.
> > > >
> > > > That is some serious amount of data.
> > > >
> > > > > 1.) Have notification point to a published document, and the
> > > document
> > > > lists
> > > > > all of the relevant reachability in real time. Thus any change
> to
> > > the
> > > > > document would generate a NOTIFICATION.
> > > >
> > > > + a download of up to 1 GB per peer.
> > > >
> > > > > 2.) User partial domains, broken up by the "dots". This may
> allow
> > > some
> > > > > wildcarding to reduce the number of domains. For instance, a
> > carrier
> > > > like
> > > > > Verizon may have many 100's of domains attached to it, and
> version
> > > is
> > > > > willing to route and manage SIP traffic to any of them. The
> NOTIFY
> > > could
> > > > > contain something like: Verizon.com or *.verizon.com to
indicate
> > > that
> > > > any
> > > > > domain in Verizon is reachable.
> > > >
> > > > That's helpful if a provider uses subdomains for internal
> purposes,
> > > > but that won't help you with customer owned domains.
> > > >
> > > > > This technique may work -- and fit nicely into an existing
> > protocol.
> > > All
> > > > we
> > > > > would need to do is define the data models (XML?) and or
> documents
> > > for
> > > > > exchanging.
> > > >
> > > > I think this technique can work -- if you add an aggregation
step
> > > > before the routing scheme.
> > > >
> > > > Take another look at BGP: there you have the concept of an
> > > > Autonomous System and not only that of prefixes. Maybe you need
> > > > something similar.
> > > >
> > > > One approach to cope with hosted SIP domains could be to use the
> > > > hostnames as found in SRV records. E.g. for settings like
> > > >
> > > > _sip._tcp.customer.domain IN SRV 10 10 5060 sip.provider.com
> > > >
> > > > run the routing algorithm on "sip.provider.com" instead of
> > > > "customer.domain".
> > > >
> > > > Another option is to store some AS-equivalent in the customer
> domain
> > > > and have the routing algorithm operate on that. In my
> domain-policy
> > > > framework this could be expressed e.g. like
> > > >
> > > > customers.domain IN NAPTR 10 10 "u" "D2P+SIP:route-id"
> > > >       "!.*!urn:ietf:speermint:RID:1042!" .
> > > >
> > > > stating that this domain can be reached using the Speermint
> routing
> > > > logic by using the learned route to RoutingID 1042.
> > > >
> > > > Or, even better, use non-terminals, and thus refer to the
ingress
> > > > policy stored in the provider's domain:
> > > >
> > > > customers.domain IN NAPTR "" 10 10 "D2P+SIP" "" provider.com
> > > >
> > > > provider.com. IN NAPTR 10 10 "u" "D2P+SIP:route-id"
> > > >       "!.*!urn:ietf:speermint:RID:1042!" .
> > > >
> > > > (+ whatever other facts provider.com wants to announce about his
> > > > reachability.)
> > > >
> > > > This combination of our ideas can indeed work and scale to an
> > > > unlimited number of customer-owned domains.
> > > >
> > > > /ol
> > > > --
> > > > < Otmar Lendl ([e-mail]) | nic.at Systems Engineer >
> > > >
> > > > _______________________________________________
> > > > Speermint mailing list
> > > > [e-mail]
> > > > https://www1.ietf.org/mailman/listinfo/speermint
> > >
> > > _______________________________________________
> > > Speermint mailing list
> > > [e-mail]
> > > https://www1.ietf.org/mailman/listinfo/speermint
> 
> 
> 
> _______________________________________________
> Speermint mailing list
> [e-mail]
> https://www1.ietf.org/mailman/listinfo/speermint
> 
> 
> 
> 
> 


_______________________________________________
Speermint mailing list
[e-mail]
https://www1.ietf.org/mailman/listinfo/speermint