Re: [Softwires] [Softwire] draft-ietf-softwire-map-00 does NOT reflect the consensus from the WG

["Lee, Yiu" <[e-mail]>]

Dear Satoru and MAP-DT

I echo what Peng and Qiong said. When the WG agreed working on the
stateless solution, it was very clear stated that the solution would not
maintain states in the network. If the 1:1 mode changed this, this no
longer matched the requirements stated in the stateless motivation draft,
thus, it would disqualify MAP as a solution for the motivation draft.

AFAIK, the MAP Design Team could propose a change, but such a dramatic
change by introducing states in the network would require WG approval. I
would like the chairs to clarify this.

Thanks,
Yiu


On 6/24/12 12:21 PM, "Peng Wu" <[e-mail]> wrote:

>Hi Qiong, Satoru and all,
>
>I should thank Qiong for pointing this out. I gotta say I'm a bit shocked.
>If I understand the procedures of IETF correctly, a WG document should
>reflect the consensus of the WG. MAP is approved by the WG as a
>stateless solution. As a participator in Softwire, I didn't get the
>information anywhere that the MAP WG document would cover the
>so-called 1:1, in fact per-user stateful mode before it was released,
>not to say discuss in the WG. Don't the WG need to approve such big
>change anymore?
>
>Now let me provide my impression as an outsider of the MAP DT. You
>guys make great effort to build the solution, The address composition,
>the GMA algorithm, the different types of address mapping rules.
>should be quite difficult to pull together such sophisticated ideas. I
>guess that's what it takes to achieve the benifits of statelessness.
>And I admire that, bravo. Then, all of a sudden, you guys are saying,
>let's apply this sophisticated method to the different problem, by
>dropping quite some comlexity and twistting the mechanism a bit, seems
>it may work. Considering the problem are now solved in a more pure and
>clear way, I'm sorry but I CANNOT follow the logic here.
>
>On Sun, Jun 24, 2012 at 2:00 PM, Satoru Matsushima
><[e-mail]> wrote:
>> Hi Qiong,
>>
>> I'm disagree with your opinion.
>>
>> 1. Recent changes in draft-ietf-softwire-map-00 has been discussed in
>>the DT.
>> 2. MAP just covers so called '1:1 mode' with most granular mapping rule
>>for CEs provisioning, which is as one of its characteristics.
>> 3. The motivation draft does not restrict that as you stated, just
>>'assumed', it's neither 'MUST' nor 'SHOULD'.
>>
>> Best regards,
>> --satoru
>>
>>
>> On 2012/06/24, at 14:35, Qiong wrote:
>>
>>> Hi all,
>>>
>>> As we all know, once an individual draft is adopted as a WG draft, it
>>>is owned by the whole WG, rather than just the editors. Just as Remi
>>>said, the normal procedure to follow is to reach WG consensus _before_
>>>posting a newly edited version.
>>>
>>> From draft-mdt-softwire-mapping-address-and-port-03 to
>>>draft-ietf-softwire-map-00, there are several changes between them. In
>>>particular, the newly introduced "1:1 mode", which decouples IPv4 and
>>>IPv6 addressing, has never been discussed openly in the WG mailing
>>>list, or even in the MAP design team either.
>>>
>>> Actually, this "1:1 mode" is against the stateless-4v6-motivation
>>>draft. The motivation draft has clearly defines the "Stateless 4/6
>>>solution" as follows:
>>>
>>> Stateless 4/6 solution denotes a solution which does not require any
>>>per-user state (see Section 2.3 of [RFC1958]) to be maintained by any
>>>IP address sharing function in the Service Provider's network. This
>>>category of solutions assumes a dependency between an IPv6 prefix and
>>>IPv4 address.
>>>
>>> AFAIK what the WG has adopted MAP related draft is
>>>draft-mdt-softwire-mapping-address-and-port-03, NOT
>>>draft-ietf-softwire-map-00. And the stateless solution should ³response
>>>to the solution motivation document² according to the Softwire charter.
>>>That means draft-ietf-softwire-map-00 IS NOT QUALIFIED to be a WG draft.
>>>
>>> We can all recall that our softwire WG has worked on stateless
>>>solutions for more than one and a half years, and we have achieved a
>>>lot of work which has been documented in charter, stateless motivation,
>>>4rd-varients, MAP-03, etc. AFAIK all the authors have kept the basic
>>>"stateless" principle and the MAP design team is also working on it
>>>together to find a better algorithm, address format, etc. So it is
>>>really not appropriate to make such changes when MAP is adopted as a WG
>>>item in such a short time.
>>>
>>> From this perspective, draft-ietf-softwire-map-00 can only be regarded
>>>as draft-XX-softwire-mapping-address-and-port-04. It is not even the
>>>output of MAP design team.
>>>
>>> Best wishes
>>>
>>> ==============================================
>>> Qiong Sun
>>> China Telecom Beijing Research Institude
>>>
>>>
>>> Open source code:
>>> lightweight 4over6: http://sourceforge.net/projects/laft6/
>>> PCP-natcoord: http://sourceforge.net/projects/pcpportsetdemo/
>>> ===============================================
>>>
>>>
>>> _______________________________________________
>>> Softwires mailing list
>>> [e-mail]
>>> https://www.ietf.org/mailman/listinfo/softwires
>>
>> _______________________________________________
>> Softwires mailing list
>> [e-mail]
>> https://www.ietf.org/mailman/listinfo/softwires
>_______________________________________________
>Softwires mailing list
>[e-mail]
>https://www.ietf.org/mailman/listinfo/softwires